LPG-5 HIGH SPEED CENTRIFUGAL SPRAY DRYER
Application
The spray drying is the technology widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing the powder, particle or block solid products from the materials, such as: solution, emulsion, soliquoid and pumpable paste states. For this reason, when the particle size and distribution of the final products, their residual water contents, the stacking density and the particle shape must meet the precision standard, the spray drying is one of the most desired technologies.
Work Principle
Spiral-shaped hot air evenly into the drying chamber. By passing through the high-speed centrifugal spray at the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Through the very short time of contacting the heat air,the materials can be dried into the finished products. The finished products will separator. The waste gas will be discharged from blower.
Features
At a high speed of drying, after the spraying of the liquid material , the surface area of the material will be increased greatly. In the hot-air flow, 95%-98%of water can be evaporated at a moment. The time of completing the drying needs only several seconds. Products with good uniformity, mobility and solubility, high purity, good quality. The production procedures are simple and the operation and control are easy. The liquid with the moisture contents 40-60%(for special materials, The contents may reach 90%).can be dried into the powder or particle products once a time. After the drying, there is no need for smashing and sorting, so as to reduce the operation procedures in the production and to enhance the product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.
Machine Parts
Name: Observation door
Original: China
The main tower adopts the quick-open cleaning door, the clean-up door adopts the integral design, and is optimized on the manhole design of the Danish Nile spray tower. Door operation is simple and convenient, while ensuring absolute sealing, to ensure that the manhole wall will not keep the material which properly prevent contamination.
Main Features
Name: Dehumidifier
Original: China
The dehumidifier refrigerant could insert 25 degree coolant air, and combines with 85 degree output powders. Use pneumatic conveying which could properly prevent the final ingredients softening and re-wetting caused conglomerate, and could guarantee the extract fragrency and quality.
Machine Parts
Name: Inlet air spiral air distributor
Original: China
Unique inlet air spiral air distributor, it can guarantee on the circumference of the tower body, air volume down absolutely uniform, avoid wall material viscosity on the internal chamber surface.
Main Features
Name: Sprial Rotating Discharge material
Original: China
The material spiral rotating discharge by air volume, and generate negative pressure and siphon off the material which could properly prevent the congestion of powder
Technical Parameters
| type |
LPG |
| 5 |
25 |
50 |
100 |
150 |
200-3000 |
| Inlet temperature |
≤ 350°C |
| Outlet temperature |
80-90°C |
| evaporate capacity (kg/h) |
5 |
25 |
50 |
100 |
150 |
200-3000 |
| driving type |
compressed air drive |
mechanical drive |
| Rotate speed |
25000 |
22000 |
21500 |
18000 |
18000 |
15000 |
| diameter of atomizer tray (mm) |
50 |
120 |
120 |
120 |
150 |
180-340 |
| heating source |
electricity |
electricity |
electricity +steam+fuel oil+coal gas |
electricity +steam |
electricity +steam+fuel oil+coal gas |
To be solved by users |
| Electric-heating power (kw) |
9 |
45 |
60 |
81 |
99 |
|
| Dried powder recovery rate (%) |
≥ 95 |
≥ 95 |
≥ 95 |
≥ 95 |
≥ 95 |
≥ 95 |
| Installation size |
A(mm) |
1000 |
1290 |
1730 |
2500 |
2800 |
according to practical needs |
| B(mm) |
2100 |
3410 |
4245 |
5300 |
6000 |
| C(mm) |
2300 |
4260 |
4645 |
6000 |
6700 |
| φ D(mm) |
1060 |
1800 |
2133 |
2560 |
2860 |
| E1(mm) |
1050 |
1200 |
1640 |
2100 |
2180 |
| E2(mm) |
1050 |
1200 |
1640 |
2100 |
2180 |
| F(mm) |
750 |
1000 |
1250 |
1750 |
1970 |
| G(mm) |
530 |
1700 |
1750 |
1930 |
2080 |
| H(mm) |
530 |
1300 |
1800 |
2600 |
3050 |
| I(mm) |
530 |
1550 |
1600 |
1780 |
1960 |
Machine parts pictures
FAT and SAT
Shipping and Delivery
Raw Material
Previous Exhibition
Trade Distribution
Service Flow
pre-sale service
We Invite customers to visit our company and communicate on technical requirements face to face.
sale service
Responsible for debugging the equipment according to customers' requirements of various technical data. Our engineers will train our customers about equipment features and operation key points to make sure the equipment running in the best condition.
after-sale service
We provide installation, debugging, maintenance, training and other services; Provide relevant technical data, equipment, software and related GMP certification materials;Set up after-sales service hotline, and arrange personnel to visit customers every year to know more customer needs,like customer operation problems in the process of production equipment.
quality promise
Our company promises strictly operate the ISO9001 quality system certification standards and pharmaceutical equipment GMP audit requirements,promise we provide new equipment. Advanced technology,good quality.Equipment operation safe reliable, affordable, easy to maintain.
Equipment warranty period is one year,all the parts for the equipment choose well-known brand.During the warranty when equipment have problem in quality like equipment failure and damage,the company for free maintenance or replacement.
Why choose us
1.Specialized in designing, developing and manufacturing.
2.Above 130 National patents,national and provincial technology innovation awards
3.Provincial Pharma Equipment Engineering Technology Research Center
4.National High-Tech,National Pharma Equipment Industry Association,Provincial new special expertise Enterprises
5.Manufacture the solid preparation production line equipment for above 500 domestic and oversea enterprises
6.Modern production workshop and production line of high-end manufacturing equipment
7.Professional and efficient after-sales service management
8.Competitive price and prompt delivery
9.Meet ISO9001 and CE
10.OEM/ODM available
Company View
Company introduction: Changzhou Hansheng Drying Equipment Co., Ltd.
Changzhou Hansheng Drying Equipment Co.,Ltd has established in 2011 and it covers an area of 15000 square meters, possesses fixed asset of USD 5 million. The products have exported to US, Singapore, India, Ukraine, Russia, Korea and so on. The company have advanced production equipment , excellent technical team and after-sales service.
FAQ:
1. Q: Please describe your warranty period.
A: 15 months after the equipment is arrived at the destination port or 12 months after the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have own factory and pilot plant for customers to do sample testing.
